• Login | Register
VIS-GSK-F
Flush Mount Microphone Base

Flush Mount Microphone Base

  • Main Features
  • Built-in microphone socket, suitable for VIS-M series 6-pin gooseneck microphone
    It is used for inconspicuous installation on the desktop with compact design.
    Capacitive touch switch button can be optionally installed to easily set the microphone off or on for sound pickup. The built-in switch can be used for control from remote equipment.
    Touch button comes with LED status light, operates with phantom power, provides white / red two colors
    Operation with 24-48V phantom power
    Output with 3-pin XLR or 3.5 Phoenix connector
    After inserting the microphone in place, the microphone comes with fasten lock, and the
    microphone can only be removed after unlock it
    Built-in RF filter
    Equipped with rubber isolators to reduce vibration noise on the installation surface




VIS-GSK-F is a flush mount gooseneck microphone base that can be connected to all range of
VISSONIC M series microphones, the microphone can be removed from the base when it鈥檚 not in
use. The overall base is small and exquisite, with a touch button to switch the microphone on and
off. It can be connected to the VIS-AIB analog microphone connection box and used in the
CLEACON conference system, or it can connect to an analog system, such as the VIS-FS100-A

automatic feedback suppressor, mixer, audio processor etc.



Item Model for Order

VIS-GSK-F ........ Flush mount Gooseneck Microphone Base

VIS-MDA .......... rectangular metal microphone

VIS-M220 ........  220mm microphone (black) with anti-wind foam cover

VIS-M330 ......... 330mm microphone (black) with anti-wind foam cover

VIS-M410 ........  410mm microphone (black) with anti-wind foam cover

VIS-M485 ......... 485mm microphone (black) with anti-wind foam cover

VIS-M600 ......... 600mm microphone (black) with anti-wind foam cover

VIS-AIB ............ Analog microphone connection box

VIS-DCP2000-D ..........All Digital Network DSP Conference System controller

VIS-FS100-A .............. Fully automatic feedback suppressor


Features


Built-in microphone socket, suitable for VIS-M series 6-pin gooseneck microphone
It is used for inconspicuous installation on the desktop with compact design.
Capacitive touch switch button can be optionally installed to easily set the microphone off or on for sound pickup. The built-in switch can be used for control from remote equipment.
Touch button comes with LED status light, operates with phantom power, provides white / red two colors
Operation with 24-48V phantom power
Output with 3-pin XLR or 3.5 Phoenix connector
After inserting the microphone in place, the microphone comes with fasten lock, and the
microphone can only be removed after unlock it
Built-in RF filter
Equipped with rubber isolators to reduce vibration noise on the installation surface

Output impedance: 360 惟
control
High level when in down position : (DC + 5V);
Low level when in up position : (DC 0V)
LED indicator
High electric level DC + 5V) : red /
Low electric level (DC 0V) : white
Phantom power
DC: 24-48V,
Power Consumption: 4 mA typical
Switch
Touch control
Weight : 65 g
Dimensions: length 128.2 mm, maximum width 55.3 mm
Accessories
One set of metal fixing ring for standard installation, one pair of shockproof isolators
User Manual锛
Quick Setup Guide锛
Datasheet锛download file
Contact Us | About Us | Products | Site Map Copyright 漏 2020 VISSONIC Electronics Ltd. All Rights Reserved. 聽