Need help with dB-NET DSP audio matrix setup

Here is the basic signal path. The Array Microphone Unit connects to the Full Digital Networked Conference Main Unit over the conference link (this is where the microphone's audio and control are handled). The main unit's audio output then feeds into the dB-NET Digital DSP Audio Matrix (16×16).

For a basic setup:

Connect the array mic to the conference main unit.

Route the main unit's output into one input of the dB-NET matrix.

Route the matrix output to your amplifier/speakers.

Open the matrix's WEB GUI to set routing, levels and EQ for each channel.

If you are using the array mic purely as an analog/digital audio source (no full conference chain), it can also be wired directly into the matrix input.