Can the 13-inch touch panel control Dante audio matrix?

Yes, the VISSONIC 13-inch Wireless Touch Panel can be programmed to control the Dante Audio Matrix and other network-connected devices through the control system interface.

The VIS-TP13 13-Inch Wireless Touch Panel runs on Android and connects via WiFi, while the VIS-DNT22 Dante 2x2 Audio Matrix is a network-based audio routing device. The integration works as follows:

The touch panel communicates with the central control processor (or directly with network devices) over IP

Control commands can be sent via TCP/IP, UDP, or HTTP to the Dante matrix (depending on the specific control protocol supported)

Custom UI can be designed on the touch panel with faders, mute buttons, preset recall, and zone routing controls

Typical control functions you can implement:

Matrix routing — assign any Dante input channel to any output channel

Volume and mute control per channel

Preset recall — save and recall entire routing configurations

Scene switching — combine audio routing with video switching and lighting control

For a simpler setup: the dB-NET Digital DSP Audio Matrix (VIS-DSP series, 8x4 to 16x16) also supports network control and may be a more integrated solution if you don't specifically need the Dante protocol — the dB-NET series provides DSP processing plus matrix routing in one unit, with a web GUI accessible from the touch panel's browser.