VISSONIC 5G Wi-Fi Wireless Solution for Meeting Room
1. Overview
For the renovation of the old conference room, the multi-purpose hall, the on-site release hall, the temporary conference venue, etc, Wi-Fi wireless conference system can quickly and easily set up and remove after use.
VISSONIC launches 5G wireless conference system to give a proper solution for above occasions.
Features:
- Keep your desk clean and tidy without any cables
- Wireless conference system and wireless presentation system provide convenient local audio and video access solutions
- One-click quick sharing experience, allowing attendees to pay more attention to the meeting itself
- 60CM ultra-long sound pickup distance
- Possible to achieve efficient meetings.
2. Advantages
2.1 5G Wi-Fi conference system technology
Based on touch technology and Wi-Fi communication technology, VISSONIC successfully launched 5G Wi-Fi wireless conference system through independent research and development. The design of the conference unit has a proprietary appearance patent and a unique curved touch screen, which not only increases the viewing angle, but also, enhance the sense of texture, technology.
The overall delay of the system is 15ms, which is far below the delay of 24ms that can be discerned by the human ear. VISSONIC wireless conference system adopts 48K, 16-bit uncompressed audio transmission, capable of transmitting 8 channels of voice and control signals simultaneously. On the basis of a technology, it brings customers Wi-Fi wireless discussion, Wi-Fi wireless sign-in, Wi-Fi wireless voting, Wi-Fi wireless simultaneous transmission, wireless intelligent control, clock date display and other functions.
2.1.1 Real no interference
VISSONIC Wi-Fi wireless conference system adopts standard Wi-Fi communication technology and is compatible with standard Wi-Fi 2.4/5G wireless network, which enables the system to switch freely on 40 legal channels. Packet loss retransmission and intelligent channel management function, even there is external channels Overlap, it has sufficient anti-interference ability, to avoid affect system audio transmission
2.1.2 Simple setting up and installation
After simple set up on software for several minutes, the whole system will work. Each unit has signal strength indicator, you can put the units according to position of each people and follow the signal indicator.
2.1.3 Perfect sound
Each unit comes with a high-fidelity build-in loudspeaker for clear sound to you. When mainly using external loudspeaker, the system provides a built-in DSP processor with AFC automatic feedback suppression to suppress the feedback noise. The AGC automatic volume gain control allows you to control the pickup distance and use various lengths of MIC according to customer needs. The ANC automatic noise control function reduces the noise of the microphone to pick up the environment, and also has built-in speaker partitioning function, etc., so that the whole system can be freely adjusted according to different venue size, equipment and acoustic environment to achieve the ideal sound transmission.
2.1.4 Large battery compacity and energy saving
The VISSONIC conference unit uses a detachable 4900mA ultra-capacity battery. When the microphone or speaker is turned on, the unit can work continuously for 24 hours and standby life of 60 hours. The OLED display has 5 power indicators, with low-power icon on OLED screen to remind user, the administrator can also directly ｒｅｐｌａｃｅ the battery or use the DC adapter to directly supply power to the unit.
The conferencing system features a unique "energy saving" mode that automatically in standby mode if the system is inactive for two hours. This saves power while also avoiding unnecessary occupation of wireless channel resources. When the user needs to restart the meeting, they can be easily woken up through the interface of the speaking unit. This design helps minimize operating costs and extends the life of the system.
2.1.5 Work with modern meeting requirement
Each wireless conference unit provides an audio input interface, which allows the audio of mobile phones and notebooks to be easily accessed to the local conference system for mobile video conferencing and sharing of mobile device audio.。
2.1.6 Different function by models
VISSONIC wireless conference system uses 48K, 16-bit uncompressed audio transmission, capable of transmitting 8 channels of voice and control signals simultaneously. Based on this technology, we provide customers with different solutions, including wireless pure discussion units. Wireless discussion with voting, simultaneous interpretation, wireless discussion with dual simultaneous channels and other models, covering different market needs.
2.1.7 Wired/Wireless units working together
For multi-functional conference rooms, training rooms, release halls, etc., which often need to be changed in use, the chairman unit is generally wired fixed. The other audience seats temporarily increase or decrease the conference unit according to needs. At this time, the wired and wireless mixed conference system is flexible to use. Provides great convenience, the wireless unit does not need to be cabling, and can be placed directly as needed.
2.1.8 HD camera auto tracking
The system main unit comes with camera tracking function, which can send code to camera or seamless matrix to realize automatic tracking and recording of high-definition camera.
3. Configuration Diagram
4. System Introduction
4.1. 5G Wi-Fi Wireless main unit VIS-DCP2000-W
Features
The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing
One CAT5e cable to transmit up 64 channels audio and other signals.
All microphone units support audio, ID independent output. Working with voice recognition system to achieve voice role separation.
High-fidelity sound quality by lossless audio transmission technology, 48K audio sampling rate and 20Hz ~ 20KHz frequency response
A single conference controller can realize the independent control and merging of 4 conference rooms, can handle the cascade of multiple conference controllers to realize the merging and separation of larger conference rooms (Optional).
"Hand-in-Hand-Loop-Network" connection makes the system always working perfectly no matter changing discussion unit or having any malfunctioned units
The sensitivity of the unit microphone and 8 segment equalizer EQ adjusted independently.
Conference controller can output 16 segment equalized EQ to achieve sound field adjustment; pressure limit, which can recognize the noise gate passed by human voice. AGC automatic volume gain control; AFC automatic feedback suppression and auto-mix technology.
Sound output by separated zones function, each zone is automatically adjusted according to the volume of the position of the microphone, achieve longer distances pickup without whistle.
Echo cancellation, remote two-way real-time call with another conference controller or another third-party video conferencing terminal.
USB recording, controller monitor, advanced noise cancellation technology to realize clearer recording.
System date, time management, and support count-down speech.
Optional DANTE output module with other DANTE equipment used.
Can drive 2x120W POE speaker, through extension main unit, support up to 16 POE speakers.
Functions
Compliance with IEC 60914, GBT 15381-94
Connect with VIS-EXM full-digital extension main unit, it can expand to 5200 discussion units
"Hand-in-Hand-Loop-Network" connection and the system assigned to each unit independently ID to avoid ID conflict.
Both wired/wireless discussion units can connect to the controller, fast and easily to adding delegate of meetings.
Up to 8 wireless microphones to be turned on at the same time, adaptive avoiding interference technology to achieve stronger anti-interference ability, compliance with IEEE 802.11n standard Wi-Fi both for 2.4GHz and 5GHz.
2 channel audio input, XLR or RCA type, for local audio input or remote video-conferencing input.
Maximum 8-channel audio output, XLR, RCA or Phoenix type, can be connected to simultaneous interpretation output or partitioned output.
Add the audio input box, the system can be connected to other condenser microphones or dynamic microphones, more choices for users.
Built-in multi-way internal communication function.
TCP/IP connection between controller and PC
RS232 central control, realize microphone switch, priority, volume and other controls.
RS232 or RS485 to send the PELCO/VISCA protocol to realize camera auto-tracking function.
Hot plug-and-play, and auto-recovery function.
Wide range of voltage from 100V~240VAC
Without using PC software, our conference controller still owns following settings:
Limit on the number of speaking persons: By Setting the number of active units at the same time (Number is 1/2/4/6/ units), supports up to open 32 wired microphones in full-on mode.
Discussion modes:
"OPEN" Free for all, limited by the active units setting by controller, "VOICE" Can activate MIC by detecting sound without press button, "OVERRIDE" First in First out, "APPLY" To apply then to speak, "PTT" Press to speak(Optional),"ALL" Full open mode(Optional).
Voting function: Approve/Abstain/Object
Chairman unit has priority to close all other units or mute them temporarily
Chairman unit can consent the application for speaking from delegate
Simultaneous language interpretation
With PC software to add more ways of voting:
Approve/Object
Approve/Abstain/Object
Level：1/2/3/4/5
Ranking：--/-/0/+/++
By using RFID card to identify, can realize voting with names.
Control & Indicators
LCD display to show all the operations and results
4-Way button for menu operate
One-button press to start recording
light indicator
Master volume control knob
Technical Parameters
Power 100V / 240V AC
Static power consumption 12W
Maximum power consumption 150W
Frequency Response 20Hz ~ 20KHz
Noise ratio (S / N)> 80dB
Total harmonic distortion <0.05%
Channel Crosstalk> 80dB
Dimensions (mm) 483L x 260W x43.6H
Dark gray color
4.2. CLEACON VIS-WDC-T/VIS-WDD-T
Wireless Digital Discussion Chairman/Delegate Unit
Features
Stylish, low profile design with touchable interface
Wireless communication, setting up all system in few minutes to be ready for using, and put them away in short time as well
Built-in DC connector for power supply without battery
Detachable battery pack is easy to ｒｅｐｌａｃｅ and charge, 4 hours to fully charged. Can use 24 hours continuously
Internal high-fidelity loudspeaker
Pluggable microphone and long range sound pickup ability, support different length of microphone.
2.23-inch OLED display with backlight, with status of signal and battery indication icon
Head-set interface in both sides with volume adjust
Line-in interface which allows microphone or other line-in device like cell phone, laptop to pass audio through to perform teleconference
Full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices.
The unit showing time/date on the screen. Timer on display to set certain time for each delegate to speak, will remind user or close the MIC automatically.
All units can be configured as Chairman or Delegate unit through software settings based on model VIS-WDC -T.
Functions
Standard Wi-Fi technology is compatible with other Wi-Fi networks, support 2.4GHz and 5GHz on all channels.
Full-digital transmission and processing technology in uncompressed audio, professional microphone to achieve perfect sound quality at 20Hz ~ 20KHz;
128 bits digital encryption technology, with WAP2 secure connection, MAC address filtering, SSID-hiding to prevent wiretapping and unauthorized access from delegate unit
8 units of delegates can open at the same time
Support more AP working together to increasing the Wi-Fi coverage range for wireless MIC units working in a large conference room or multi-rooms
With our HD PTZ camera and video matrix switcher, using RS485 or RS232 protocol to send the PELCO/VISCA protocol to realize camera auto-tracking function
Precise cardioid directional microphone capsule with anti-wind microphone foam, with two-color LED indicator
Button for MIC ON/OFF, Priority & Apply Answer button for chairman unit
Built-in high-fidelity speakers, it automatically mutes to prevent howling when press MIC ON
Head-set interface in both sides with volume adjustment.
AGC (Automatic Gain Control)/AFC (Adaptive Feedback Cancellation)/ANC (Active Noise Control)/Mix (Auto-Mix) technology
Build-in functions for intercom
Without using PC software, our conference controller still owns following settings:
Limit on the number of speaking persons: By Setting the number of active units at the same time (Number is 1/2/4/6/ units)
Discussion modes:
"OPEN" Free for all, limited by the active units setting by controller, "OVERRIDE" First in First out, "VOICE" Can activate MIC by detecting sound without press button, "APPLY" To apply then to speak
The unit showing real time on the screen, and count-down timer for speaking person.
Detachable battery pack is easy to ｒｅｐｌａｃｅ and charge, 4 hours to fully charged. Can use 24 hours continuously, power-saving technology to enable 24 hours continuous use and 48 hours for standby.
Combined with camera and camera tracking controller, it has an automatic camera tracking function.
With 2.5mm adapter power supply interface, used for emergency power supply.
Built-in MCU, support wireless upgrade of all units.
With voice control function, you can adjust the sensitivity of voice control, intelligently turn on the microphone and set the off time.
Control & Indicators
Microphone with two-color LED ring, red indicates speaking status, green indicates request to speak.
128x32 OLED display with volume bar, clock, time span of microphone activating, MIC ON/OFF etc. and other information.
Indicator for Volume adjustment
Indicator for MIC ON/OFF
Chairman unit with priority button and consent button for the delegates
Power ON/OFF button is hiding on the left side
Interfaces
Pluggable gooseneck microphone base
2x 3.5mm stereo headphone jack
1x 3.5mm stereo input jack
Contactor for battery pack
DC Connector for power adaptor
Technical Parameters
Button: Touchable interface
Sound Pickup: heart type capacitance
Display: OLED display 128 × 32
Sensitivity: -46 dBV / Pa
Maximum power consumption: 2.0W
Directivity: 0 ° / 180 °> 20 dB (1 kHz)
Headphone load: 16Ω
Headphone volume: 10mW
Headphone jack: 3.5mm stereo
Input impedance: 2kΩ
SNR: 70dB
Frequency response: 20 ~ 20000Hz
Equivalent noise: 20dBA (SPL)
Main material: ABS
Operating temperature: 0 ℃ to + 55 ℃
Color: Black
The maximum sound pressure: 125dB (THD <3%)
Weight: 1.1kg (with microphone)
Dimension: 185L × 130W × 50Hmm (without microphone)
4.3. CLEACON VIS-WVC-T/VIS-WVD-T
Wireless Digital Discussion + Voting Chairman/Delegate Unit
Features
Stylish, low profile design with touchable interface
Wireless communication, setting up all system in few minutes to be ready for using, and put them away in short time as well
5 buttons for voting and ranking.
Detachable battery pack is easy to ｒｅｐｌａｃｅ and charge, 4 hours to fully charged. Can use 24 hours continuously, working time is 24 hours, 40 hours for standby
Built-in DC connector for power supply without battery
Internal high-fidelity loudspeaker
built-in up 3 channels interpretation (optional on another model)
Pluggable microphone and long-range sound pickup ability, support different length of microphone.
2.23-inch OLED display with backlight, with status of signal and battery indication icon
Head-set interface in both sides with volume adjust
Line-in interface which allows microphone or other line-in device like cell phone, laptop to pass audio through to perform teleconference
Full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices.
The unit showing time/date on the screen. Timer on display to set certain time for each delegate to speak, will remind user or close the MIC automatically.
All units can be configured as Chairman or Delegate unit through software settings based on model VIS-WVC-T.
Functions
Compliance with IEC 60914, GBT 15381-94
Standard Wi-Fi technology is compatible with other Wi-Fi networks, support 5GHz on all channels.
Full-digital transmission and processing technology in uncompressed audio, professional microphone to achieve perfect sound quality at 20Hz ~ 20KHz;
128 bits digital encryption technology, with WAP2 secure connection, MAC address filtering, SSID-hiding to prevent wiretapping and unauthorized access from delegate unit
8 units of delegates can open at the same time
Support more AP working together to increasing the Wi-Fi coverage range for wireless MIC units working in a large conference room or multi-rooms
With our HD camera and video matrix switcher, using RS485 or RS232 protocol to send the PELCO/VISCA protocol to realize camera auto-tracking function
Precise cardioid directional microphone capsule with anti-wind microphone foam, with two-color LED indicator.
5 voting buttons and 1 MIC ON/OFF button, Priority & Apply Answer button for chairman unit
Built-in high-fidelity speakers, it automatically mutes to prevent howling when press MIC ON
Head-set interface in both sides with volume adjust
AGC (Automatic Gain Control)/AFC (Adaptive Feedback Cancellation)/ANC (Active Noise Control)/Mix (Auto-Mix) technology
Build-in functions for intercom
Without using PC software, our conference controller still owns following settings:
Limit on the number of speaking persons: By Setting the number of active units at the same time (Number is 1/2/4/6/ units)
Discussion modes:
"OPEN" Free for all, limited by the active units setting by controller, "OVERRIDE" First in First out, "VOICE" Can activate MIC by detecting sound without press button, "APPLY" To apply then to speak
Voting function: Approve/Abstain/Object
Chairman unit has priority to close all other units or mute them temporarily
Chairman unit can consent the request for speaking from delegate
More voting functions available by PC software
The unit showing real time on the screen, and count-down timer for speaking person.
Detachable battery pack is easy to ｒｅｐｌａｃｅ and charge, 4 hours to fully charged. Can use 24 hours continuously, power-saving technology to enable 24 hours continuous use and 48 hours for standby
Combined with camera and camera tracking controller, it has an automatic camera tracking function.
With 2.5mm adapter power supply interface, used for emergency power supply.
Built-in MCU, support wireless upgrade of all units.
With voice control function, you can adjust the sensitivity of voice control, intelligently turn on the microphone and set the off time.
Control & Indicators
Microphone with two-color LED ring, red indicates speaking status, green indicates request to speak.
128x32 OLED display with volume bar, clock, time span of microphone activating, MIC ON/OFF etc. and other information.
Indicator for Volume adjustment
5 voting keys with indicators, while no launching voting, no.2 and no.3 button is also work as channel selecting buttons, no.4 and no.5 work as volume buttons.
Indicator for MIC ON/OFF
Chairman unit with priority button and consent button for the delegates
Power ON/OFF button is hiding on the left side
Interfaces
Pluggable gooseneck microphone base
2x 3.5mm stereo headphone jack
1x 3.5mm stereo input jack
Contactor for battery pack
DC Connector for power adaptor
Technical Parameters
Button: Touchable interface
Sound Pickup: heart type capacitance
Display: OLED display 128 × 32
Sensitivity: -46 dBV / Pa
Maximum power consumption: 2.0W
Directivity: 0 ° / 180 °> 20 dB (1 kHz)
Headphone load: 16Ω
Headphone volume: 10mW
Headphone jack: 3.5mm stereo
Input impedance: 2kΩ
SNR: 70dB
Frequency response: 20 ~ 20000Hz
Equivalent noise: 20dBA (SPL)
Main material: ABS
Operating temperature: 0 ℃ to + 55 ℃
Color: Black
The maximum sound pressure: 125dB (THD <3%)
Weight: 1.1kg (with microphone)
Dimension: 185L × 130W × 50Hmm (without microphone)
Item Model for Order
VIS-WVC-T...........Wireless Voting and interpretation Chairman unit, battery and microphone are not included
VIS-WVD-T............Wireless Voting and interpretation Delegate unit, battery and microphone are not included
VIS-WBTY1..............Battery pack for each unit,8.4VDC,6600mA
VIS-WCH1.................Charger for battery
VIS-M330..................330mm Microphone, with anti-wind foam cover
VIS-M410..................410mm Microphone, with anti-wind foam cover
VIS-M485..................485mm Microphone, with anti-wind foam cover
VIS-M600..................600mm Microphone, with anti-wind foam cover
4.4. CLEACON VIS-AP4C
2.4GHz/5GHz Conference Access Point
Features
Connect with the Wi-fi conference processor VIS-DCP2000-W, or with the switch to extend more conference AP in the same system.
Typical coverage range 30m
Install on ceiling, wall or with stand rack mount
128 bits AES digital encryption technology, with WAP2 secure connection, MAC address filtering, SSID-hiding to prevent wiretapping and unauthorized access from delegate unit
Functions
LED indicator for signal/power
2.4G/5GHz dual band communication
LAN support POE power supply
RJ45 for LAN connection
Technical Parameters
Power Consumption Operational:11 Watt
Power Over Ethernet (POE)supported: POE
Installation: Ceiling, Wall or Stand Rack
Dimension: 220Lx220Wx45H(mm)
Weight:0.3KG
Color: White
Item Model for Order
VIS-AP4C.................. 2.4GHz/5GHz Conference Access Point (White)
4.5. CLEACON VIS-WBTY1
Rechargeable Battery pack for wireless unit
Features
Long life and lasting stability of charging performance
After fully charged it can use 24 hours
Four hours needed to fully charge
Efficient lithium batteries
Functions
Contactor by pop-up pins
Buckle housing to prevent poor contact or dropping
Certifications
CE certification
Technical Parameters
Battery capacity: 4900mA
Output voltage: 7.2VDC
Weight: 285g
Operation temperature: -20℃~60℃
Item Model for Order
VIS-WBTY1.................. Battery pack for wireless units,4900mA 7.2VDC
VIS-WCH1.................. Charger for battery, 8 pcs VIS-WBTY1 at one time
4.6. CLEACON VIS-WCH1
Charger for battery
Features
Three hours needed to fully charge
MAX 8 pcs battery charging at one time
Wide range power input: 100V~240V AC
Buckle housing to prevent poor contact or dropping, light in weight for easy moving
Functions
Contactor by pop-up pins
Buckle housing to prevent poor contact or dropping
Certifications
CE certification
Technical Parameters
Input: 100 ~ 240VAC 50 ~ 60HZ
Output: 7.2V/1000mA
Power consumption: 20W
Size: 320Lx200Wx50H(mm)
Weight: 2KG
Item Model for Order
VIS-WBTY1.................. Battery pack for wireless units, 4900mA 7.2V DC
VIS-WCH1.................. Charger for battery, 8 pcs VIS-WBTY1 at one time
4.7. VIS-CATC-A
Camera Auto-tracking processor
It's a auto-tracking camera controller, can support both traditional preset position camera tracking as well as new infrared located tracking function. It has a built-in 4*1 matrix switcher to process different signals and with the function of image freezing. Besides, it will manage several cameras at the same time.
Main Features
4 HD/3G SDI input, 1+1 HDMI output.
4x1+1 seamless scaler switcher, maximum supported output resolution is 1080P@60Hz
Seamless switching, no jitter, no blank screen.
Adjustable image freezing function
Functions
Turn on/off the channel number indicators
4x1 seamless scaler switcher, maximum supported output resolution is 1080P@60Hz,
Seamless switching, no jitter, no blank screen.
Adjustable image freezing function (freezing time from 1 to 6 seconds, freezing time cannot be less than 0.5 second or freezing function would be turned off).
RS232 port to work with central controller or CLEACON series or CLASSIC-D series conference main unit for camera auto-tracking function.
4.8. VIS-CDC Series HD VIDEO CAMERA
.jpg)
Features
H.265 support
H.265 encoding supports conference cameras, and can realize full HD 1080p / 60fps video streaming through ultra-low bandwidth.
1080P Full HD
Using a new generation of Panasonic's 1 / 2.8 inch high-quality high-definition CMOS sensor with 2.07 million effective pixels, it can achieve high-quality images with a maximum resolution of 1920x1080
Ultra high frame rate
The output frame rate of 1080P is up to 60fps, the output frame rate of 720P is up to 120fps (only supported by the network), and 640x480P can be up to 240fps (only supported by the network, optional).
AAC audio coding
supports AAC audio coding, with better sound quality and smaller bandwidth.
Local storage
supports local storage module, without NVR recording directly to local USB flash drive.
The low light and high SNR of the CMOS sensor combined with 2D and 3D noise reduction algorithms effectively reduces the noise. Even under low illumination conditions, the picture can still be kept clear and clear.
Various interface, support HDMI output, 3G-SDI interface, effective transmission distance up to 150 meters (1080p30 or less). HDMI, SDI, and network can be output simultaneously. It also supports CVBS interface.
20x Optical + 32x Digital Zoom Use TAMRON high quality super telephoto lens, support 20x optical zoom, and 32x digital, 30x Optical + 16x Digital Zoom (Model VIS-CDC-30-S)
Remote Control
Using RS232/485 interface, all the parameters of the camera can be remote controlled by the high-speed communications.
Specification
| VIS-CDC-S，VIS-CDC-30-S | VIS-CDC-U | ||
| Video System |
HD: 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/25, 720p/120 (supported by network only), 720p/60, 720p/50, 720p/30, 720p/25, 640x480p/240 (supported by network only, optional) SD: 480i, 576i | ||
| Sensor | 1/2.8'', CMOS, Effective Pixel: 2.07M | ||
| Scanning Mode | Progressive | ||
| Lens | 20x, f4.42mm ~ 88.5mm, F1.8 ~ F2.8，or 30x, f4.3mm ~ 129.0mm, F1.8 ~ F2.8(Model VIS-CDC-30-S) | ||
| Digital Zoom | 32x (optional)，16x(optional Model VIS-CDC-30-S) | ||
| Minimal Illumination | 0.5 Lux @ (F1.8, AGC ON) | ||
| Shutter | 1/30s ~ 1/10000s | ||
| White Balance | Auto, 3000K/Indoor, 4000K, 5000K/Outdoor, 6500K_1, 6500K_2, 6500K_3, One Push, Manual | ||
| Backlight Compensation | Support | ||
| Digital Noise Reduction | 2D&3D Digital Noise Reduction | ||
| Video S/N | ≥55dB | ||
| Horizontal Angle of View | 60.7° ~ 3.36° | ||
| Vertical Angle of View | 34.1° ~ 1.89° | ||
| Horizontal Rotation Range | ±170° | ||
| Vertical Rotation Range | -30° ~ +90° | ||
| Pan Speed Range | 1.7° ~ 100°/s | ||
| Tilt Speed Range | 1.7° ~ 69.9°/s | ||
| H & V Flip | Support | ||
| Image Freeze | Support | ||
| Face Detection | Support (optional) | ||
| Local Storage | Support | ||
| Number of Preset | 255 | ||
| Preset Accuracy | 0.1° | ||
| USB Featured | |||
| Operate System | Windows XP, Windows Vista, Windows 7, Windows 8, Mac OS X, Linux | ||
| Color System | YUV 4:2:2 | ||
| Video Format |
USB3.0: 1080p/60, 1080p/50, 1080p/30, 1080p/25, 720p/60, 720p/50, 720p/30, 720p/25 USB2.0: USB2.0:960x540p/30, 960x540p/25, 640x360p/60, 640x360p/50 | ||
 USB Video Communication Protocol | UVC 1.0 | ||
| UVC PTZ | Support | ||
| IPC Features | |||
| Video Compression | H.265/H.264/MJEPG | ||
| Video Stream | Main Stream, Sub Stream | ||
| Main Stream Resolution | 1920x1080, 1280x720, 1024x576 | ||
| Sub Stream Resolution | 720x576, 720x480, 320x240 | ||
| Video Bit Rate | 128Kbps ~ 8192Kbps | ||
| Bit Rate Type | Variable Rate, Fixed Rate | ||
| Frame Rate | 50Hz: 1fps ~ 50fps, 60Hz: 1fps ~ 60fps, 720p120: 120fps, 640x480p240: 240fps | ||
| Audio Compression | AAC | ||
| Audio Bit Rate | 96Kbps, 128Kbps, 256Kbps | ||
| Support protocols | TCP/IP, HTTP, RTSP, RTMP, Onvif, DHCP, Multicast, etc. | ||
| Input/Output Interface | |||
| HD Output |
1xHDMI: Version 1.3 1x3G-SDI: BNC type, 800mVp-p, 75Ω, Along to SMPTE 424M standard |
1xHDMI: Version 1.3 | |
| SD Output | 1xCVBS: 3.5mm mini jack, 1Vp-p, 75Ω | None | |
| Network Interface | 1xRJ45: 10M/100M Ethernet Interface | ||
| Audio Interface | 1-ch: 3.5mm Audio Interface, Line In | ||
| USB | 1xUSB2.0: Type A female jack |
1xUSB3.0: Type B female jack 1xUSB2.0: Type A female jack | |
| Communication Interface | 1xRS232 In: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA/Pelco-D/Pelco-P | ||
| 1xRS232 Out: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA network use only | |||
| 1xRS485: 2pin Phoenix Port, Max Distance: 1200m, Protocol: VISCA/Pelco-D/Pelco-P | |||
| Power Jack | JEITA type (DC IN 12V) | ||
| Generic Specification | |||
| Input Voltage | DC 12V | ||
| Current Consumption | 1.0A (Max) | ||
| Operating Temperature | -10°C ~ 40°C (14°F ~ 104°F) | ||
| Storage Temperature | -40°C ~ 60°C (-40°F ~ 140°F) | ||
| MBTF | ≥30000 hours | ||
| Power Consumption | 12W (Max) | ||
| Size | 169mm x 142mm x 164mm | ||
| Net Weight | 1.35Kg (3.0lb) | ||